) as well as to non-memory mapped flashes (external I2C EEPROM, external NAND flash. This applies to flash that is memory mapped accessible by the MCU (internal flash, external QSPI NOR flash. Supported flash typesīecause a SEGGER Flash Loader programs the flash via the MCU it runs on, basically any flash (or other non-volatile memories) can be supported. In case of doubt, please feel free to contact SEGGER. While they may work by chance, no support is provided for problems in regards to getting SEGGER Flash Loaders running on non-listed architectures. Cortex-R4, Cortex-R5, Cortex-R7, Cortex-R8Īrchitectures / cores not listed here must be assumed as being not supported.Cortex-A5, Cortex-A7, Cortex-A8, Cortex-A9, Cortex-A12, Cortex-A15, Cortex-A17.The SEGGER Flash Loader (SFL) is available for the following architectures: If not stated otherwise for a specific function / feature / etc., the minimum supported J-Link software version is V7.80.
Minimum supported J-Link software version The SEGGER Flash Loader (SFL) is part of the J-Link Device Support Kit (DSK) and allows users to add flash programming support for a new device on their own.
